Z Axis Adjuster for Ortur Laser Master 2 Pro Model (new) | Z Height Adjuster

Description

Ortur PRO MODEL Z Axis Adjuster  - Works with Ortur Laser Master 2 Pro Model Only. This gives you 40mm of Z travel for quick and easy focus.
YOU MAY NEED TO ADJUST YOU ENDSTOP and we recommend moving the end stop
Uses 4mm allen wrench to adjust, includes Tool Holder and T-Handle wrench, as well as a black focus card.
Install:
-Entirely disassemble the z axis adjuster, if it came assembled
-Remove the dovetail pieces from both your carriage and module
-Replace those pieces with the printed counter-parts (see image above) and slide it together on the machine
-Insert barrel nut and drop M5 bolt through hole in the top of the carriage plate
-Attach the bolt lock clip over the bolt head
Optional 50mm spacer to replace the stock one.
---
Originally from the design (I Have permission and pay royalties)
By PLAY3Rone977
https://www.thingiverse.com/thing:4607685
Remixed by paulmacdermot
https://www.thingiverse.com/thing:4627986
The T-Handle wrench is designed by Kezat
https://www.thingiverse.com/thing:951909