-40%
Trio Kenwood L-07D Turntable - Holy Grail Audiophile Made In Japan - VERY RARE!
$ 8448
- Description
- Size Guide
Description
LOCAL PICKUP AND CASH ONLY.Located in Tryon NC 28782.
Up for your consideration is a very rare opportunity to own a Trio Kenwood L-07D Turntable!
This is by far the nicest model turntable Kenwood made, and one of the nicest turntables to ever hit the market.
They were in production from 1980-1983.
It is substantially built, weighing 77 LBS.
It has an SAE cartridge that sounds very nice.
It includes the original power supply.
Everything is in great shape! It works perfectly.
SPECIFICATIONS:
Drive: quartz PLL direct drive system
Motor: coreless and slotless DC servo motor
Platter: 33cm, 5.5kg, aluminium alloy die-cast
Speeds: 33.33 and 45rpm
Wow and flutter: less than 0.02% WRMS
Signal to noise ratio: more than -94dB
Tonearm: static-balance type, J-shaped pipe arm
Effective length: 245mm
Overhang: 15mm
Stylus pressure range: 0 to 2g
Usable cartridge weight: 1 to 9g (9 to 22g with additional weight)
Adjustable height range: within 7mm by helicoid fixture
Headshell: compression moulded carbon and boron fibres
Arm base: collet chuck type
Dimensions: 555 x 160 x 470mm
Here are some more details:
“The extremely high inertia direct motor drive is kept perfectly in time with a crystal-controlled frequency generator and stays perfect no matter what influence the input mains voltage may have. And any abnormal external breaking of the platter is corrected instantly. So, when the designers set out to build a turntable with a 'zero tolerance' for speed errors, they did exactly that.
The Plinth is a monster, a three-part affair utilising a huge aluminium subframe through which is bolted both the motor (via with 6 massive hex bolts) and the huge tonearm base. This massive machined aluminium casting is cast together into the main plinth section which is made from a concrete resin called ARCB (Anti-Resonance Compression Base).
This ARCB section forms most of the plinth, The last section is a large section of mahogany, seated and integrated into the ARCB base by 34 screws. The ARCB base alone weighs in at 10kg.
The 4 large adjustable feet are constructed of a two-piece machined brass billet.
The tonearm on this turntable is also astonishing. The 3kg machined and cast unit allows you to adjust the VTA on-the-fly whilst listening with zero tracking errors. The tonearm tube itself is made from a unique mix of resonant cancelling materials, hard aluminum, boron fiber and carbon fiber.
The construction of the tonearm tube has a different structure of these materials at the cartridge end than the weighted end with the materials being layered in such a way as to adapt to the greater vibrations from the cartridge. It's truly a wonder of how this was achieved and the whole assembly lives up to being a separate precision machine on its own and a thing of beauty in its own right.”
LOCAL PICKUP AND CASH ONLY.
LOCATED IN TRYON, NC 28782
THANKS!