Thorens Td 318 Turntable Exclusive Veneer Design

Description

Thorens Td 318 Turntable Exclusive Veneer Design
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Individual production! Please note the processing time specified on Ebay!
Individual production! Please note the processing time specified on Ebay!
This turntable is available in 220V/ 50Hz or 110V/60Hz (
for example
USA)!
EXCLUSIVE
318 with precious wood veneer and high-gloss lacquer coating
With limit switch, plastic inner plate and 7mm plate bearing
Our turntables are lovingly assembled, modified and assembled by hand.
Each of them is unique and differs in model, colour, veneer grain or other details.
The high-quality cases are restored or newly manufactured in qualified craftsmanship.
Electrical components are checked,
moving parts oiled and wearing parts replaced.
A final endurance test completes the complex work
.
The customer receives a top-class device.
Item description:
Housing:
The case
was coated with precious wood veneer. The veneer was cut into different veneer parts and put together (mirrored) to form a uniform veneer pattern. This technique is very complex, but impresses with its unique appearance. The surface is covered with several layers of high-gloss lacquer
sealed and polished with appropriate intermediate cuts
.
absorber plate
:
Specially constructed absorber plate. The absorption of low frequencies and material vibrations takes place on two levels.
Level 1:
On the top of the base there is an integrated vibration absorption by means of 5 absorbers made of felt. An absorber is centered under the base plate and eliminates the negative vibrations of the often criticized tin tub. Another 4 absorbers are located under the feet of the turntable.
Level 2:
4 height-adjustable spikes made of chrome-plated stainless steel on the underside of the absorber plate.
This double absorption results in a significantly improved sound image.
Pickup Ortofon OM 5E
:
New
Big PSU:
A new power supply unit is included in the scope of delivery. This power supply has twice the power of the original power supply.
Performance bottlenecks and heating no longer occur.
New audio cable:
brand cable.
Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.
The turntable:
The turntable is made in five laborious and time-consuming steps
polished to a high gloss.
The mirror finish gives your turntable a unique look.
With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine.
New chromed stainless steel spikes
:
So that the turntable is decoupled from low-frequency vibrations,
the chassis is equipped with height-adjustable spikes.
Resonance and feedback are thus effectively prevented.
New drive belt:
This drive belt is manufactured to original Thorens specifications (same material and dimensions).
New record weight made of stainless steel:
With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This record weight plays in the middle "weight class. It adds just enough weight to dampen plate vibration without stressing the bushings. The suspension of the Thorens sub-chassis has been readjusted accordingly. By using it, you increase the sound performance of your system.
--------
The following
parts
are
as
accessories
uh
right
rise
etc
daily
and
Not
component
this
auction
:
the
following
parts
are
available
like
accessories
other
not
included
in
this
auction
:
New hood incl.
Cartridge MM System including installation: