THORENS TD 201 Turntable w/ Cartridge & phono-preamp 100-240v AUTHORIZED-DEALER

Description

WE ARE AN
AUTHORIZED
THORENS DEALER!
BLACK
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.
SPECIAL FEATURES
Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.
Turntable section
Drive System
Belt Drive
Motor
DC Motor
Speed
33 1/3 RPM, 45 RPM
Rotation Speed Variation
+/–2%
Wow and Flutter
0.2%
Signal-to-Noise Ratio
67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter
Aluminum Die-cast
Diameter of Platter
12", 300mm
Tonearm section
Alumi tube
Type
Static Balance, Straight
Effective Arm Length
8.8", 223.6mm
Stylus Pressure Range
0 to 4g
Supported Cartridge Weight
3.5 to 6.0g
Overhang
18.6mm
Anti-skating Adjustment
Supported
Cartridge section
Type
MM type (Audio-Technica AT3600)
Stylus Construction
Bonded Diamond
Frequency Response
20Hz to 20kHz
Channel Separation
>18dB
Channel Balance
2.5dB
Vertical Tracking Angle
20 degrees
Supported Load Impedance
47k ohms
Output Voltage
2.5mV (1kHz, 3.54cm/sec.)
Stylus Pressure
3.5g +/–0.5g
Cartridge Weight
5g +/–0.5g
Head-shell Weight
10g (including Screws, Nuts and Wires)
Analog Output
Connector
RCA Pin jack (Gold-plated)
Power
AC 100 to 240V, 50/60Hz
Power Consumption
1.5W (less than 0.5W at Standby)
Overall Dimensions (W x H x D)
420 x 355x 121mm
Weight
Approx. 3.9 kg