Restored Thorens TD145 Turntable Limited Edition Caliente Red Metallic

Description

Restored Thorens TD145 Turntable Limited Edition Caliente Red Metallic
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
RESTORED and MODIFIED by ART-AND-SOUND
Restored 145
with limit switch in caliente red metallic
Designer piece - design product - дизайнерский продукт
WITH A FIGHTING WEIGHT OF OVER 10 KG!!!
Our turntables are lovingly assembled, modified and assembled by hand.
Each of them is unique and differs in model, colour, veneer grain or other details.
The high-quality cases are restored or newly manufactured in qualified craftsmanship.
Electrical components are checked,
moving parts oiled and wearing parts replaced.
A final endurance test completes the complex work
.
The customer receives a top-class device.
the
phonograph
works with
220V/
50Hz.
For shipping to the USA the turntable is converted on 110V/60Hz .
Item description:
limit switch:
Yes
inner plate:
metal
Bearing mandrel:
10mm
basic dimensions:
Width: 45cm, depth: 36cm, height approx. 18cm
A notice:
The red turntable cover was replaced by the original Thorens (black).
The case:
The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material.
It is very complex with several layers of high-gloss paint
sealed and polished with appropriate intermediate cuts
. The connection panel for all required cable connections is located on the back.
face plate:
Top plate made of 1mm aluminum with surface finish in caliente red metallic
The cartridge Ortofon OM10:
With the OM series, Ortofon has long since created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The OM 10 is the entry into the series and is a super entry-level system for medium-priced turntables.
The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.
The audio cable:
Brand cable from "Oehlbach".
Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.
The turntable:
The turntable is made in five laborious and time-consuming steps
polished to a high gloss.
The mirror finish gives your turntable a unique look.
With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine.
Chromed stainless steel spikes
:
So that the turntable is decoupled from low-frequency vibrations,
the chassis is equipped with height-adjustable spikes. Resonance and feedback are thus effectively prevented.
The drive belt:
The drive belt is new. It is manufactured to the original Thorens specifications (same material and dimensions).
New record weight made of stainless steel:
With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This record weight plays in the middle "weight class. It adds just enough weight to dampen plate vibration without stressing the bushings. The suspension of the Thorens sub-chassis has been readjusted accordingly. By using it, you increase the sound performance of your system.
--------
The following
parts
are
as
accessories
uh
right
rise
etc
daily
and
Not
component
this
auction
:
hood small
43cm x 34cm x 8cm (to be placed on the frame
):
Ebay
-
item number
112401191474
hood big
48cm x 38.5cm x 20cm (to be placed on the substructure):
Ebay
-
item number
112411582098
the
turntable hoods
will
Not
With
hinges
fastened
,
but
only
put on
.
the
following
parts
are
available
like
accessories
other
not
included
in
this
auction
:
Hood small
43cm x 34cm x 8cm (for mounting on the housing):
German eBay
-
article
number
is
112401191474
Hood large
48cm x 38.5cm x 20cm (to put on the base):
German eBay
-
article
number
is 112411582098
Cartridge MM systems including installation:
The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss paint sealed and polished with appropriate intermediate cuts. The connection panel for all required cable connections is located on the back. Brand cable from "Oehlbach". Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This
Antriebstyp
Riemenantrieb
Marke
Thorens - Restauriert von Art-and-Sound
EAN
Nicht zutreffend
Modell
TD 145
Herstellernummer
nicht zutreffend
Herstellungsland und -region
Deutschland