Ortur Laser Master 2 Pro Air Assist (40mm X 40mm ) Choice of color Brass Tipped

Description

I have milled out a brass nozzle and drilled and tapped it to keep the tip of the nozzle from being dinged and deformed in cases where you forget to adjust laser height, and yes we all forget to do that. Top plate to keep hose up and out of the way and can easily be zip tied to wire loom. Lastly I remove my acrylic top plate and put mine on but my plate is thin enough just to mount on top of acrylic plate if you choose to leave it on
***THE SET SCREW ON SIDE OF NOZZLE HAS BEEN DELETED SINCE THE TOP PLATE KEEPS IT IN PLACE***
AN AIR ASSIST IS NOT JUST FOR CUTTING. IT HELPS KEEP YOUR LASER LENS FREE OF SMOKE AND DEBRIS. OVER TIME YOUR LASER LENS CAN BECOME DIRTY AND THE LASER BEAM CAN BE PARTIALLY OBSTRUCTED ALLOWING LESS OF THE LASER LIGHT TO GET THROUGH. IT ALSO CLEARS DEBRIS AND BURNT WOOD THAT WOULD OTHERWISE FALL BACK INTO YOUR ENGRAVING CAUSING INCONSISTENT ENGRAVING AS THE LASER MUST BURN THROUGH ADDITIONAL THICKNESSES OF WOODAS. IT CAN ALSO CUASE AS BURNT AREAS TO APPEAR WHERE THERE WAS A BUILD UP OF BURNT DUST AND DEBRIS
Ortur Air Assist PLA 3D printed (40mm X 40mm ) Your choice of colors. Condition is "New". Black, White, Red, Blue, Purple, Glow in the Dark green, Glow in the Dark Blue, Galaxy Blue, Gold, Silver, Copper, Transparent, Pink and Skin toned and Temperature sensitive filament that turns from Pink to Purple. Please see pictures for what the colors look like.
If you would like another color not listed and are willing to wait 1 week to 10 days i will get the color in and make it for you.  IF YOU DO NOT SPECIFY A COLOR THE DEFAULT COLOR IS RED
This bracket holds the air nozzle at the perfect angle to blow burnt wood dust out of the hole not only for cutting but also prevents burnt dust falling back into your engraving causing your laser to have to burn through it again plus your print work. Makes your prints much more consistent
Hose and pump NOT included
***DUE TO THE FACT I MAKE THESE TO ORDER IT CAN TAKE UP TO 7 DAYS TO SHIP. GENERALLY ITS LESS THEN THAT AS I TRY TO GET THEM DONE AND SHIP AS QUICK AS POSSIBLE***
FEEL FREE TO EMAIL ME AT ANYTIME TO GET A STATUS ON YOUR ORDER.