LC Miller Tigair Pneumatic Portable Reciprocating HackSaw P/N 17652-M !USED!

Description

As pictured only ( no blades only tool) USED TIGAIR Portable Reciprocating Saw ( some in-graved numbers on the back of the tool)
The TIGAIR SAW® reciprocating air saw is used in industrial and emergency service application. It is ideal for cutting many different types of material such as metal, plastic, fiberglass, dry wall, cement, and wood. This saw is in effective conformance to the
directive and standard.
Specifications:
U.S. System
Metric
Weight
5.58 lbs.
2.531
The saw's light weight makes it suitable for one hand use if necessary
Size
1.625" W
4.128 cm W
The saw can be used in confined spaces because of it's small size
5.750" H
14.605 cm H
16.000" L
40.640 cm L
Hose Size
.375"
.953cm
Standard 3/8" hose size is recommended
Strokes per min.
0 to 1200
0 to 1200
Can easily be adjusted during operations to maintain any speed from stop to 1200 strokes per minute.
Stroke Length
1.750"
4.445 cm
Twin piston power provides for continuous smooth power during forward and rearward stroke
Air Consumption
6.5 cu. ft
.182 cu m
The saw can utilize air from any source capable of generating 6.5 cu. feet of air per minute.
Air pressure
90-110 psi.
6 to 7.333 bars
The saw operates at its best with 90 to 110 psi.
Blade
.500" H
1.270 cm H
The saw uses standard hacksaw, sectional band or modified reciprocating saw blades.
.025 to .035 T
.0635 cm to .0899 cm T
Standards
OSHA
The saw meets OSHA standards
Approval
Gov't
Federal Government National Stock Number 5130-01-0540737 CAGE Code for L.C. Miller Co. 09260
Conformity
Hand-Held Non-Electric Power Tools - Safety Requirements. Part 12: Small Circular, Small Oscillating and Reciprocating Saws, EN 792-12:2000
Operational Features:
Cutting efficiency
Maximum cutting efficiency is on the back stroke. By cutting on the back stroke, the saw creates greater stability, because it is not pushing the work away. This characteristic helps eliminate vibration. However, the saw will cut with teeth facing either direction and in an upward or downward position.
Self-lubrication
The saw and blade are self-lubricating. This safety feature facilitates cutting and enhances the non-sparking characteristic of the saw.
Submersible
The saw is a true all weather and condition tool. It can be safely used under fresh or salt water, fire retardant foam, oil, mud, slurries and hazardous material.
Non-vented areas
The saw can be used in non-vented areas without fear of poisoning, carbon monoxide asphyxiation and oxygen displacement by carbon dioxide because it does not emit noxious fumes or carbon dioxide.
Quiet operation
The saw is surprisingly quiet because of its silencer sleeve.
Blade length
The saw needs only two inches of blade or less protruding beyond the nose piece when the blade is fully retracted.
Blade changing
Only two set screws need to be loosened or tightened to remove or install a blade.
Diving adapter
A special diving adapter that diverts the exhaust air bubbles to a hose and away from the diver's field of vision for prolonged undersea operations is available.