-40%
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *
K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *

K40 Laser UPGRADE adjustable table accessory table bed CO2 * Laser Raiser *

$ 58.08

Availability: 100 in stock
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • Model: K 40
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Engraving Method: Laser
  • Return shipping will be paid by: Buyer
  • Condition: New

    Description

    ** Please note that eBay applies additional sales tax but manufacturer does not **
    Take your Laser-craft skills to the next level.
    New Laser Raiser adjustable table accessory for K40 Laser engraver cutter.  Measures 13-3/4" x 10" and
    fits in an empty K40 Laser bed that has a cabinet face width between 28" and 33"
    .  Complete with hardware and installation instructions.
    Two 1/2" holes drilled in the face of the cabinet are required along with some smaller fastener holes and shortening or removal of vent duct
    .
    More info and installation videos are at manufacturer's site, RAYBAR Solutions, and on youtube.
    "
    https://youtu.be/mG9akqs7vXw
    "
    "
    https://youtu.be/lbL4kA_-DDI
    "
    Now is the time to tame your K40 Laser's focus and take your skills to the next level with a durable aluminum hand crafted and easily adjustable
    Laser Raiser
    table.  Use it to find your laser's "sweet spot" or to work on many different material thicknesses with just the twist of your wrists.  Internal cams, removable foam spacers, a bubble level and your nimbleness on 2 control knobs is all that is needed to raise and lower the table lift range nearly 1-1/2 inches to quickly bring your project into sharp focus.
    Laser Raiser specs
    10" x 13-3/4" foot print (250mm x 344mm)
    Minimum table height, 2-3/16" (54.5mm)
    Maximum lift, 1-1/2" (37.5mm)
    Removeable 3/8" lift spacers to enable greater "Z" axis  for thicker material or to partially offset use of your 1/2" (12.5mm) honeycomb.
    Some drilling required at front cabinet panel and on cabinet floor.
    Your K40 Laser is between 28" and 33" wide.
    Requires shortening the air duct inside the cabinet by at least 3.75" (a task that many K40 users have already done).  Better yet, remove it permanently.
    The
    Laser Raiser
    is a manually adjustable table bed for the K40 laser.  It is easily controlled by two external knobs that raise the table over 1-inch to attain optimum focus in the Z-axis.  This means that you can perfectly focus on material thicknesses between 1/16 inch and 1-1/2 inches below the 2-inch focal length of most K40's.  The Laser Raiser will even help you determine your focal length sweet spot.
    k40 Laser table
    Laser-bed
    Laser-accessory
    Laser-engraver
    Laser-cutter
    Laser-K40
    Laser-CO2
    k40 Laser