HABOTEST AC/ Digital Clamp Meter Multimeter Voltmeter Volt Ohm Amp Tester U9Z4

Description

This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/ voltage, AC/ current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more functions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and .
Features:
CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC/ current, AC/ voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non- AC voltage (NCV) detection, and live detection.
WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.
LOUD BEEP: NCV send out audible and visual alarm once received electromagnetic signal.
MORE FUNCTIONS: Features data hold, flashlight, low display, Celsius/Fahrenheit degree, Max./Min./Relative value, and (reset) .
TO USE: Designed and conforms to IEC61010-1, III 1000V, and reliable.
AUTO-OFF: Auto off within 15 minutes if there is no operation, helps conserve the .
MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.
Note:
* read the user manual carefully before use for safety.
* not included.
Parameters:
Display: 6000 count
Clamp Opening Size: 40mm
Auto-off: approx. 15 minutes
Max. Voltage Between Terminals and Earth Ground: AC750V or 1000V
<>
<>
Resolution
<>
Accuracy
< colspan="3">
Current (MAX current: 1000A)
<>60A <>0.01A < colspan="1" rowspan="3">±(2.5%reading+8)
<>600A <>0.1A
<>1000A <>1A
< colspan="3">
AC Current (MAX current: 1000A, True RMS)
Frequency : 0.1~600A: 40Hz~400Hz
600~1000A: 40Hz~60Hz
<>60A <>0.01A < colspan="1" rowspan="3">±(2.5%reading+8)
VFD: ±(5.0%reading+10)
INRUSH: ±(5.0%reading+10)
<>600A <>0.1A
<>1000A <>1A
< colspan="3">
Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload : AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
<>600mV <>0.1mV < colspan="1" rowspan="4">±(0.5%reading+5)
<> <>0.001V
<>60V <>0.01V
<>600V <>0.1V
<>1000V <>1V <>±(0.8%reading+5)
< colspan="3">
AC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload : AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
Frequency : 40Hz~1kHz, True RMS
<>600mV <>0.1mV < colspan="1" rowspan="4">±(0.8%reading+5)
<> <>0.001V
<>60V <>0.01V
<>600V <>0.1V
<>750V <>1V <>±(1.0%reading+5)
<>VFD(750V) <>0.1V <>±(2.0%reading+5)
< colspan="3">
Resistance
Overload :
<>600Ω <>0.1Ω < colspan="1" rowspan="6">±(1.0%reading+5)
<>6kΩ <>0.001kΩ
<>60kΩ <>0.01kΩ
<>600kΩ <>0.1kΩ
<>6MΩ <>0.001MΩ
<>60MΩ <>0.01MΩ
<>
Diode
<>It displays the approximate forward voltage value of the diode. <>Forward current is about 1.5mA;
Reverse voltage is about 3V;
Overload :
<>
Continuity
<>Test Voltage Approx. 1V
Overload :
< colspan="3">
Capacitance
Overload :
<>10nF <>0.001nF < colspan="1" rowspan="7">±(4.0%reading+5)
<>100nF <>0.01nF
<>1000nF <>0.1nF
<>10μF <>0.001μF
<>100μF <>0.01μF
<>1000μF <>0.1μF
<>10mF <>0.001mF
<>100mF <>0.01mF <>±(5.0%reading+10)
< colspan="3">
Frequency/Duty Ratio
Overload :
<>10Hz <>0.001Hz < colspan="1" rowspan="6">±(1.0%reading+3)
<>100Hz <>0.01Hz
<>1000Hz <>0.1Hz
<>10kHz <>0.001kHz
<>100kHz <>0.01kHz
<>1000kHz <>0.1kHz
<>10MHz <>0.001MHz < colspan="1" rowspan="2">±(3.0%reading+3)
<>1~99% <>0.1%
< colspan="3">
Temperature
*The below does not inlcude the error of thermocouple probe.
< colspan="1" rowspan="3">℃ < colspan="1" rowspan="3">1℃ <>±3℃ (-20℃~0℃)
<>±1.0% or ±2℃ (0℃~400℃)
<>±2.0% (400℃~1000℃)
< colspan="1" rowspan="3">℉ < colspan="1" rowspan="3">1℉ <>±6℉ (-4℉~32℉)
<>±1.0% or 4℉ (32℉~752℉)
<>±2.0% (752℉~1832℉)
Specifications:
Brand: HABOTEST
Material: ABS
Color: Black and Red
: 2pcs, 1.5V, AAA alkaline ( not included)
Item Size: 24*8*4.5cm / 9.44*3.14*1.77in
Item Weight: 311g / 10.97oz
Package Size: 27.5*13.5*5.5cm / 10.82*5.31*2.16in
Package Weight: 620g / 21.86oz
Packing List:
1 * Digital Clamp Meter
1 * Thermocouple
2 * Test
1 * User Manual(English)