Fluke 89 IV True RMS Digital Multimeter 89IV 89-4 89-IV

Description

ebay template
The Following Items Are Included:
Fluke 89 IV True RMS Digital Multimeter (BC# 32493-L/T*)
(2) 1000V Hard Point Test Leads
User Manual On CD-ROM
Carrying Case (G)
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
Fluke 89 IV True RMS Digital Multimeter
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Claibrated: Yes
Warranty: 1 YEAR WARRANTY
The top-of-the line Fluke 89 Series IV, in stand-alone operation, can log up to 1000 measurements. The PC interface allows for further analysis and documentation using optional FlukeView ™ software. It sounds like a lot to get in one DMM. But what else do you expect from Fluke?
Nominal Specifications
Function
Ranges/Description
DC Voltage
0 to 1000V
DC Current
0 to 10A (20A for 30 seconds)
AC Voltage, True-rms
15 mV to 1000V - 100 kHz bandwidth
AC Current, True-rms
25 μA to 10A (20A for 30 seconds)
Resistance
0 to 30 Mohms
Conductance
0 to 50 Nanosiemens
Capacitance
0.01 nF to 50 mF
Diode Test
3.1V
Temperature
-200°C to 1350°C (-328°F to 2462°F)
Frequency
0.5 Hz to 1000 kHz
Accuracy (Basic DC V)
0.025%
(Basic AC V)
0.4%
Features
Feature
Description
Dual Displays
50,000 count primary display 5,000 count secondary display
Backlight with 2 brightness selections
Bright white backlight for clear readings in poorly lighted areas
Fast Autorange
Meter automatically selects best range -instantly
AC+DC True RMS, ac rms specified to 100 kHz
Choices for AC only, AC and DC dual display, or AC+DC readings
dBm, dBV
User selectable impedance references for dBm
AutoHOLD
Uses Touch Hold® feature to capture readings
Continuity/Open Test
Beeper sounds for Ohms readings below threshold or for momentary open circuit indication
Fast Bar Graph
51 Segments for peaking and nulling
Duty Cycle/Pulse Width
Measure time a signal is on or off in % or milliseconds
MIN MAX/Fast MIN MAX with elapsed and Real Time Stamp
Record Maximum, Minimum, and Average values. Real Time for MAX or MIN, elapsed time for AVG. Fast MIN MAX captures peaks to 250 msec.
Closed Case Calibration
No internal adjustments needed
Battery/Fuse Access Door
Battery or fuse replacement without voiding calibration
Hi-Impact Overmold Case
Integrated Protective Holster provides superior impact protection for your meter
Detailed Specifications
Accuracy is specified for a period of one year after calibration, at 18°C to 28°C (64°F to 82°F) with
relative humidity to 90%. Accuracy specifications are given as ±([% of reading] + [number of least
significant digits])
Function
Range
Resolution
Accuracy
45 Hz-1 kHz
20 Hz-45 Hz
1 kHz-10 kHz
10 kHz-20 kHz
20 kHz-100 kHz
AC mV
500.00 mV
0.01 mV
0.4% + 40
2% + 80
5% + 40
5% + 40
6% + 40
3000.0 mV
0.1 mV
0.4% + 40
2% + 80
0.4% + 40
1.5% + 40
6% + 40
AC V
5.0000V
0.0001V
0.4% + 40
2% + 80
0.4% + 40
1.5% + 40
6% + 40
50.000V
0.001V
0.4% + 40
2% + 80
0.4% + 40
1.5% + 40
6% + 40
500.00V
0.01V
0.4% + 40
2% + 80
0.4% + 40
Not specified
Not specified
1000.0V
0.1V
0.4% + 40
2% + 80
0.4% + 40
Not specified
Not specified
dBV
-56 to -6
0.01 dB
0.1 dB
0.2 dB
0.5 dB
0.5 dB
0.5 dB
-6 to +34
0.01 dB
0.1 dB
0.2 dB
0.1 dB
0.2 dB
0.5 dB
+34 to +60
0.01 dB
0.1 dB
0.2 dB
0.1 dB
Not specified
Not specified
Accuracy
Function
Range
Resolution
45 Hz-1 kHz
20 Hz-45 Hz
1 kHz-20 kHz
20 kHz-100 kHz
AC mA
500.00 μA
0.01 μA
0.75% + 20
1% + 20
0.75% + 20
6% + 4
5.000 μA
0.1 μA
0.75% + 5
1% + 5
0.75% + 10
2% + 40
AC mA
50.000 mA
0.001 mA
0.75% + 20
1% + 20
0.75% + 20
9% + 40
400.00 mA
0.01 mA
0.75% + 5
1% + 5
1.5% + 10
4% + 4
AC A
5.0000A
0.0001A
1.5% + 20
1.5% + 20
6% + 40
Not specified
10.000A
0.001A
1.5% + 5
1.5% + 5
5% + 10
Not specified
Function
Range
Resolution
DC
Accuracy Dual Display AC or AC+DC
20 Hz-45 Hz
45 Hz-1 kHz
1kHz-20 kHz
DC mV
500.00 mV
0.01 mV
0.03% + 2
2% + 80
0.6% + 40
6% + 40
3000.0 mV
0.1 mV
0.025% + 5 (89-IV) 0.025% + 10 (87-IV)
2% + 80
0.6% + 40
DC V
5.0000V
0.0001V
0.025% + 10
2% + 80
0.5% + 40
50.000V
0.001V
0.03% + 3
2% + 80
0.5% + 40
500.00V
0.01V
0.1% + 2
2% + 80
0.5% + 40
Not specified
1000.0V
0.1V
0.1% + 2
2% + 80
0.5% + 40
Not specified
DC mA
500.00 mA
0.01 mA
0.25% + 20
7% + 10
7% + 10
9% + 40
5.000 mA
0.1 mA
0.25% + 2
1% + 10
0.75% + 10
2% + 40
DC mA
50.000 mA
0.001 mA
0.15% + 10
1% + 10
0.75% + 10
2% + 40
400.00 mA
0.01 mA
0.15% + 2
1.5% + 10
1.5% + 10
3% + 40
DC A
5.0000A
0.0001A
0.5% + 10
7% + 20
7% + 20
12% + 40
10.000A
0.001A
0.5% + 2
1.5% + 10
1.5% + 10
3% + 40
Accuracy is specified for a period of one year after calibration, at 18°C to 28°C (64°F to 82°F) with relative humidity to 90%. Accuracy specifications are given as ±([% of reading] + [number of least significant digits])
Function
Range
Resolution
Accuracy
Resistance
500.00W
0.01W
0.05% + 10
5.0000 kW
0.0001 kW
0.05% + 2
50.000 kW
0.001 kW
0.05% + 2
500.00 kW
0.01 kW
0.05% + 2
5.0000 MW
0.0001 MW
0.15% + 4
30.000 MW
0.001 MW
1% + 4
Conductance
50.00 nS
0.01 nS
1% + 10
Capacitance
1.100 nF
0.001 nF
1% + 5
11.00 nF
0.01 nF
110.0 nF
0.1 nF
1.100 mF
0.001 mF
11.00 mF
0.01 mF
110.0 mF
0.1 mF
1,100 mF
1 mF
11.0 mF
0.01 mF
50.00 mF
0.01 mF
Diode Test
3.1000V
0.0001V
2% + 2
Frequency
500.00 Hz
0.01 Hz
± (0.005% + 1)
5.0000 kHz
0.0001 kHz
50.000 kHz
0.001 kHz
999.99 kHz
0.01 kHz
Duty Cycle
10 to 90%
0.10%
± (0.12 x Voltage Range/ Input Voltage x 100%)
Pulse Width
5.0000 ms
0.0001 ms
± (0.0001 ms + 1)
50.000 ms
0.001 ms
Temperature
-200 to +1350°C
0.1°C
± (1% of reading + 1°C)
-328 to +2462°F
0.1°F
± (1% of reading + 1.8°F)
Min-Max-Avg
Response: 100 ms to 80%
Specifed accuracy ± 12 counts for changes >200 ms in duration (± 40 digits in AC for changes >350 ms and inputs >25% of range)
Fast Min-Max
250 ms
Specified accuracy ± 100 counts for changes >250 ms in duration
Interval LOGGING
At least 288 intervals (specified by user in Setup) may be recorded to internal memory. These values may be viewed using the VIEW MEM function on the meter. Up to 700 unstable event values (similar to AutoHold) are automatically added to LOGGING memory for viewing only through the optional FlukeView® Forms PC software. Additional intervals will be logged if the signal is stable.
Reading SAVE
Up to 100 readings may be saved by the user in a memory separate from LOGGING memory. These readings may be viewed using VIEW MEM.
Frequency Counter Sensitivity
Input Range
Minimum Sensitivity (RMS Sine Wave)
Approximate Trigger Levels
(DC Voltage Function)
20 kHz
40 Hz
500 kHz
50 mV (dB only)
10 mV
15 mV
15 mV
± 25 mV
500 mV
100 mV
50 mV
30 mV
35 mV ± 6 mV
5000 mV
1000 mV
2000 mV
2000 mV
170 mV ± 6 mV
5V
1V
2V
2.2V
1.7V ± 0.25V
50V
10V
15V
5V
3.5V ± 2.5V
500V
100V
50V
50V
35V ± 25V
1000V
200V
250V
50V
35V ± 25V
Input Impedance
Function
Input Impedance (Nominal)
Volts, mV
10 MΩ, < 100 pF
Common Mode Rejection Ratio (1 kΩ Unbalanced)
Normal Mode Rejection
DC Volts, mV
>100 dB -dc, 50 Hz, or 60 Hz ± 0.1%
>90 dB at 50 Hz, or 60 Hz ± 0.1%
AC Volts, mV
> 90 dB dc to 60 Hz
Open Circuit Test Voltage
Full-Scale Voltage
To 5 MΩ
30 MΩ + nS
Ohms
< 5V
500 mV
3.1V
Diode Test
< 5V
3.1000V
Typical Short-Circuit Current
500Ω
5 kΩ
50 kΩ
500 kΩ
5 MΩ
30 MΩ
Ohms
100 μA
100 μA
10 μA
1 μA
0.1 μA
0.1 μA
Diode Test
0.8 mA typical
Burden Voltage (A - mA - μA)
Function
Range
Burden Voltage (typical)
mA -μA
500.00 μA
102 μV/μA
5.000 μA
102 μV/μA
50.000 mA
1.8 mV/mA
400.00 mA
1.8 mV/mA
A
5.0000A
0.04 V/A
10.000A
0.04 V/A
For full Fluke 98 IV product specifications, please click here:
Fluke 89 IV
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management