Fluke 789 ProcessMeter - New in Box - MFG Date 2021 - MSRP 1275

Description

Fluke 789 ProcessMeter
New in Box
Includes:
AC175 Alligator Clips
Four (4) AA 1.5 V alkaline batteries (installed)
TL71 safety-designed test lead set
Product overview: Fluke 789 ProcessMeter™
Fluke 789 ProcessMeter™ doubles your troubleshooting power
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.
The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
Do a lot more while carrying a lot less
The 789 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.
Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.
Accuracy
This ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.
Specifications: Fluke 789 ProcessMeter™
Specifications
Current measurement
Range
0-1 A AC or DC
Resolution
1 mA
Accuracy
0.2% + 2 LSD (DC)
Range
0-30 mA
Resolution
0.001 mA
Accuracy
0.05% + 2 lSD
Current sourcing
Range
0-20 mA or 4-20 mA
Resolution
0.05% of span
Drive capability
24 V Compliance or 1200 Ω @ 20 mA
Frequency
to 19.999 kHz, 0.005% + 1 LSD
Continuity
Beeps for resistance < 100 Ω
Voltage measurement
Range
0-1000 V AC (true-rms) or DC
Resolution
0.1 mV to 1.0 V
Accuracy
0.1% Rdg + 1 LSD (VDC)
Resistance measurement
to 40 MΩ, 0.2% + 1 LSD
Diode test
2.0 V shoes diode voltage drop
Display current and % of span
Yes
Auto Step, Auto Ramp
Yes
Environmental Specifications
Operating temperature
-20°C to 55°C
Storage temperature
-40°C to 60°C
Humidity (without condensation)
95% up to 30°C
75% up to 40°C
45% up to 50°C
35% up to 55°C
Temperature coefficient
0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C)
Safety Specifications
Electrical safety
Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92
Overvoltage category
IEC 1010-1 CAT III 1000 V
IEC 1010-1 CAT IV 600 V
Maximum voltage
1000 V RMS
Mechanical and General Specifications
Size (H x W x L)
50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in)
Weight
610 g (1.6 lbs)
Batteries
4 AA alkaline batteries
Warranty
3 years
Battery life
140 hours typical (measurement), 10 hours typical (sourcing 20 mA)
Shock and vibration
Random, 2 g, 5-500 Hz
1 meter drop test