Elmo Rietschle KTA 60/1(37) Druvac Vacuum Pump 3PH 208-230460VAC - Inv #3539

Description

Elmo Rietschle KTA 60/1(37) Druvac Vacuum Pump 3PH 208-230460VAC - Inv #3539
We are pleased to offer this
Elmo Rietschle KTA 60/1(37) Druvac Vacuum Pump
This
Elmo Rietschle KTA 60/1(37) Druvac Vacuum Pump
has been powered up and tested. This vacuum pump was removed from a Stahl T66 Folder. It is in good working condition. This item will ship by Freight. Local Pickup is also available. Please see the specifications below and contact us if you have any questions.
Introduction:
The model KTA 60/1 (37) is a dry running rotary vane pump with a vacuum and pressure port. All vacuum air is filtered by a built in micro-fine filter. The carbon dust which is the result of the carbon blades wearing is also separated by built-in filters. A high efficiency cooling fan is located between the pump housing and the motor. The pumping unit is encased in a rugged black sound enclosure. The compressed air is cooled by an after cooler. The pressure/vacuum pump is driven by a direct flanged three phase, standard TEFV motor via a pin and bush coupling. Pressure and vacuum can be adjusted to the required levels, however, they are limited to a maximum point.
Model /1 is for standard vacuum and pressure capacity ratio; model /2 is for maximum compressed air capacity ratio; model /3 is for maximum vacuum capacity ratio and model /5 is for increased pressure. Versions (01) to (30) are with cooling exits from two sides whilst versions (31) to (60) are with a cooling exit on one side only. All models have nominal capacities of 40, 50, 60, 80, 100 and 140 m3/hr operating at 50 cycles. The pressure and vacuum limits (bar) are indicated on the data plate. The tables showing capacity against pressure and vacuum can be seen in the specifications section below
Specifications:
Pressure/Vacuum Pump:
Manufacturer:
Elmo Rietschle
Model:
KTA 60 /1 (37)
Serial Number:
2123271
Year of Mfgr:
2000
Country of Origin:
Germany
Flow Rate (CFM):
37.7
Max Pressure (PSIG):
10.2
Max Vacuum (in HgV):
18.1
Electric Motor
Manufacturer:
Baldor Electric Co.
Spec:
36J235W41561
Serial:
F0110113629
Phase:
3
Horsepower:
5 HP
Voltage (Low):
208-230 VAC
Amps:
15-13.2
Voltage (High):
460 VAC
Amps:
6.6
RPM:
1725
FREIGHT QUOTES:
We will provide freight quotes upon request. Please remember that all freight quotes are estimates. Remember to let us know if the shipping address is
Residential or Commercial
.
Please e-mail us your phone number for the freight company in case they need to contact you.
Crating is available for an additional charge.
Freight shipments will ship COLLECT (for freight charges only) to the buyer's location. Buyer is responsible for paying freight shipping charges, as required by buyer's chosen freight company.
Shipping:
This item will be wrapped, banded and shipped via Freight Truck, per Buyer's instructions, at Buyer's expense.
Crating is available (trucking companies may require that your item be crated). See item description for exact crating charge for this item. We will load on truck for no additional charge.
All sales are made f.o.b. our plant, Topeka, KS.
Title to the goods, unless otherwise provided, passes to purchaser upon delivery of the merchandise to the carrier.
Print & Finishing Equipment’s (PFE) responsibility ceases upon issuance of a bill of lading or delivery to carrier. PFE has no responsibility for goods in transit. Unless otherwise agreed in writing by PFE, all freight charges, insurance and handling charges from PFE’s plant, Topeka, KS will be on a “collect” basis and purchaser agrees to pay same to carrier.
Please e-mail us your phone number for the freight company in case they need to contact you.
We will provide freight quotes upon request.
Please remember that all freight quotes are estimates.
We can not know the actual charge for shipment until the item is fully prepared (crated) for shipment. The item is not currently crated and size and weight estimates have been approximated. Any additional charges before or after shipment by the trucking company are the buyers responsibility.
Freight shipments will ship COLLECT (for freight charges only) to the buyer's location. Buyer is responsible for paying freight shipping.
We will assist as much as possible in arranging shipping within the USA.
PLEASE NOTE:
For destinations in all other countries please contact us before purchasing to let us know how you intend to ship your item.
Buyer must contact us to arrange shipping or pickup after purchase price & crating/handling charges have been paid.
NOTE: Purchase price, crating & packaging (if applicable) must be paid in full before item will ship.
This item is available for local pickup if the buyer would like to avoid shipping costs.
The Buyer is responsible for all shipping charges including insurance, crating and packaging fee (if applicable).
Item will be shipped as soon as possible after payment is received. (Usually within 10 business days)
If payment is made via PayPal please be sure you have a PayPal confirmed address.
Payment Options:
Accepted payment methods:  PayPal
Payments should be completed within 3 days of purchasing item.
If the buyer chooses to have us arrange shipping and crating is required, you may pay the crating fees when shipping is paid. Otherwise you should add the crating charge to the purchase price when making payment via PayPal or other method.
Store Policies
Contacting us:
Buyers should use the "Ask seller a question" link at the top of the listing to request more information on an item.
We will make every attempt to answer emails promptly.
Please contact us with any questions you may have before you purchase any item.
Feedback:
We return all positive feedback after the transaction is completed.
Your satisfaction is very important to us.  Before leaving negative feedback, please contact us so we can come to an agreement that is satisfactory to both parties.
All sales are final:
All items are sold AS-IS, WHERE-IS, unless otherwise stated in the items description.
Sales Tax:
Sales tax will be charged on all items shipped to destinations within the State of Kansas.
You are purchasing the item(s) as photographed.
The Buyer is not to infer or assume that any other items or accessories are included unless outlined in the description above.
Returns
All returns are subject to the conditions as stated in the
Seller's Return Policy
section of the item listing. Returned items must be insured for the purchase value. Upon receipt of the item in its original condition we will exchange the item with an identical replacement. If no replacement is available we will refund the purchase price only. Items returned that have been damaged by the buyer will not be eligible for a refund. Shipping, handling, packaging and insurance charges are not eligible for refund unless the return is due to an error by us (i.e. wrong item shipped)
Best Offers
Many of our store items are eligible for you to make us an offer. Click on the "Make Offer" button (if available) to send us your offer on the item you are interested in purchasing. Please note that our regular business hours are Monday through Friday, except Holidays.