Digital Clamp Meter Multimeter Handheld DC/AC Auto Range Ohm Amp Tester LCD TRMS

Description

Specifications:Brand: U`King Color: yellowType: multi-purpose clamp tableMaterial: ABSMeasuring voltage range: 600 (V)Measuring current range: 200 (A)Measuring the resistance range: 200 k Ω - 2 m (Ω)Battery: 2* AAA batteries (excluding batteries)Maximum display: 1999, automatic polarity eliminationMeasurement method: double integral A/D switchSampling speed: 2 times per secondOverload indicator: display "1"Working environment: 0℃~40℃, relative humidity <80%Storage environment: -10℃~50℃, relative humidity <85%Static: approx. 4 mAClamping clamp size: open jaw 25mm;Inner diameter 35 mmTechnical conditions: factory accuracy within 1 year, temperature range of 23℃±5℃, relative humidity <75%.ADP function: put ...
Ligua-light-de
Digital Clamp Meter Tester AC/DC 6000 Counts Multimeter Auto Range Current TRMS
Specifications:
Brand: U`King
Color: yellow
Type: multi-purpose clamp table
Material: ABS
Measuring voltage range: 600 (V)
Measuring current range: 200 (A)
Measuring the resistance range: 200 k Ω - 2 m (Ω)
Battery: 2* AAA batteries (excluding batteries)
Maximum display: 1999, automatic polarity elimination
Measurement method: double integral A/D switch
Sampling speed: 2 times per second
Overload indicator: display "1"
Working environment: 0℃~40℃, relative humidity <80%
Storage environment: -10℃~50℃, relative humidity <85%
Static: approx. 4 mA
Clamping clamp size: open jaw 25mm;Inner diameter 35 mm
Technical conditions: factory accuracy within 1 year, temperature range of 23℃±5℃, relative humidity <75%.
ADP function: put the function switch in the ADP position, connect the sensor or DC voltage signal.Voltage range is 0-199.9mV, LCD displays 0-1999.
Data saving: press the "HOLD" button during measurement, the data will be held and the "H" signal will appear.The data is not refreshed until the button is pressed again.The "H" will then disappear and exit the data holding state.
Battery replacement: if the battery "+-" signal appears on the display sn, it indicates that the battery needs to be replaced.Remove the screws, open the trunk, and replace the used battery (AAA battery) with a new one.
Instrument inspection:
A. When the measured value exceeds the range, please check whether the battery is low.
B. When measuring voltage or resistance, if there is no reflection, check whether the test leads are well connected.
Packing list:
Multimeter*1
Table pen*2
Instruction manual*1
Item Specifics
Features
Data Hold, Clamp Multimeter, LCD Display
MPN
Does Not Apply
Display
Digital
DC Voltage
200mV/2V/20V/200V/600V
Resistance Range
40M
Resistor
200/20K/200K/2M/20M
Voltage range
600（V）
Current range
200 (A)
Test/Measurement Functions
AC Current
Form Factor
Handheld
Power
2* AAA batteries (excluding batteries)
Brand
UKing
DC Voltage Range
Current to 600 amp
AC Voltage Range
Current to 600 amp
UPC
0711707219328
Payment
Returns
Ligua-light-de
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Digital Clamp Meter Tester AC/DC 6000 Counts Multimeter Auto Range Current TRMS
Specifications:
Brand: U`King
Color: yellow
Type: multi-purpose clamp table
Material: ABS
Measuring voltage range: 600 (V)
Measuring current range: 200 (A)
Measuring the resistance range: 200 k Ω - 2 m (Ω)
Battery: 2* AAA batteries (excluding batteries)
Maximum display: 1999, automatic polarity elimination
Measurement method: double integral A/D switch
Sampling speed: 2 times per second
Overload indicator: display "1"
Working environment: 0℃~40℃, relative humidity <80%
Storage environment: -10℃~50℃, relative humidity <85%
Static: approx. 4 mA
Clamping clamp size: open jaw 25mm;Inner diameter 35 mm
Technical conditions: factory accuracy within 1 year, temperature range of 23℃±5℃, relative humidity <75%.
ADP function: put the function switch in the ADP position, connect the sensor or DC voltage signal.Voltage range is 0-199.9mV, LCD displays 0-1999.
Data saving: press the "HOLD" button during measurement, the data will be held and the "H" signal will appear.The data is not refreshed until the button is pressed again.The "H" will then disappear and exit the data holding state.
Battery replacement: if the battery "+-" signal appears on the display sn, it indicates that the battery needs to be replaced.Remove the screws, open the trunk, and replace the used battery (AAA battery) with a new one.
Instrument inspection:
A. When the measured value exceeds the range, please check whether the battery is low.
B. When measuring voltage or resistance, if there is no reflection, check whether the test leads are well connected.
Packing list:
Multimeter*1
Table pen*2
Instruction manual*1
Item Specifics
Features :
Data Hold, Clamp Multimeter, LCD Display
MPN :
Does Not Apply
Display :
Digital
DC Voltage :
200mV/2V/20V/200V/600V
Resistance Range :
40M
Resistor :
200/20K/200K/2M/20M
Voltage range :
600（V）
Current range :
200 (A)
Test/Measurement Functions :
AC Current
Form Factor :
Handheld
Power :
2* AAA batteries (excluding batteries)
Brand :
UKing
DC Voltage Range :
Current to 600 amp
AC Voltage Range :
Current to 600 amp
UPC :
0711707219328
Payment
Returns
All rights reserved.
Powered by SoldEazy