Digital Auto Range Clamp Meter Multimeter AC / DC Voltmeter Amp Volt Ohm Tester

Description

Specifications:
Comfort Home
Digital Auto Range Clamp Meter Multimeter AC / DC Voltmeter Amp Volt Ohm Tester
Specifications:
Color: blue, red
Type: digital clamp table
Battery: AAA (excluding battery)
Material: ABS
Display: LCD, updated 2000 times every 2 seconds
Polarity indication: "-" automatic display
Overrange indication: display "OL"
Indication of low battery: display "electrode"
Range selection: automatic
Measuring voltage range :600 (V)
Measuring current range :2-400 (A)
Measuring the resistance range: 200-200 k - 2 m (Ω)
Operating temperature: 0℃ to 40℃, less than 80% RH
Storage temperature: -10℃ to 50℃, relative humidity less than 85%
Battery type: 1.5v * 2, AAA size (excluding battery)
Technical conditions: 1 year accuracy guaranteed, 23℃±5℃ relative humidity less than 80% RH
Replace the battery: if the battery "+-" sign appears on the display screen, the battery should be replaced.Remove the screw and open the back cover and replace the used battery with a new one (AAA, 1.5v * 2 or equivalent).
Automatic shutdown:
A. If you do not operate the meter for about 15 minutes, it will turn off automatically.To turn it on again, simply rotate the range switch or press the button.
B. If the "hold" button is pressed to wake up the meter after the meter is automatically turned off, the automatic shutdown function will be disabled.
Introduction:
The instrument performs AC/DC voltage, AC current, resistance, audible continuity, diode and temperature measurements.It is a 3 1/2 bit, 2000 bit automatic range digital clamp multimeter.It has the function of polarity indication, data retention, maximum value retention, overrange indication and automatic shutdown.It is easy to operate and an ideal instrument.
Warning:
To avoid electric shock or personal injury, and to avoid damage to the instrument or equipment under test, please follow the following rules:
1. Check the case before using the meter.If the meter is damaged or the enclosure (or part of the enclosure) is removed, please do not use.Look for cracks or lack of plastic.Note the insulation around the connector.
2. Check whether the insulating layer of the meter pen is damaged or the metal is exposed.Check the conductivity of the test line.
3. The voltage between terminals or between any terminal and ground shall not exceed the rated voltage indicated on the instrument.
4. The rotating switch should be placed in the correct position and no range conversion should be carried out during the measurement to prevent damage to the meter.
5. When the effective voltage of the instrument in ac exceeds 60V or 30V RMS, extra care should be taken to avoid electric shock.
6. Use appropriate terminals, functions and ranges for measurement.
7. Do not use or store instruments in high temperature, high humidity, explosive, flammable and strong magnetic fields.The performance of the instrument may be degraded by dampness.
8. Put your finger behind the finger guard when using the stylus.
9. Before testing the resistance, conductivity or diode, disconnect the circuit power and discharge all high voltage capacitors.
10. Replace the battery immediately after the battery indicator light appears.If the battery is low, the meter may produce the wrong reading, which can lead to electrocution and personal injury.
11. Disconnect the connection between the meter pen and the circuit under test, and turn off the power of the meter before opening the case.
12. Please use only the same model or the same electrical specifications to replace the instrument.
13. The internal circuit of the meter shall not be altered at will to avoid damage to the meter and any accident.
14. The instrument surface should be cleaned with a soft cloth and mild detergent to prevent corrosion, damage and accidents.
15. The instrument is suitable for indoor use.
16. Turn off the power when the meter is not in use. Take out the battery when it is not in use for a long time.Continue to check the battery, because there may be leakage after a period of use, please replace the battery immediately when leakage occurs.Battery leakage can damage the meter.
Packing list:
1 x Multimeter
2 x Table pen
1 x Storage bag
1 x Instruction manual
Item Specifics
Display
Digital
MPN
Does Not Apply
Brand
Unbranded
Features
Auto Power Off
Form Factor
Handheld
Resistance Range
200-200 k - 2 m (Ω)
Measuring voltage range
600 (V)
Measuring current range
2-400 (A)
Test/Measurement Functions
AC Current
Battery type
1.5v * 2, AAA size (excluding battery)
Manufacturer Warranty
1 year
UPC
Does not apply
Test/Measurement Functions
AC Current
Battery type
1.5v * 2, AAA size (excluding battery)
UPC
Does not apply
Payment
1. We only accept payment via
PayPal
. Please kindly check if you can do the payment via PayPal before placing an order. If you don't have PayPal account, please register at paypal.
2. Payment must be received within 7 days after auctions ended. Unpaid dispute will be filed to eBay for the non payable bidders.
Shipping
1. Items will be shipped within 2 business day of receipt of the verification payment.(except weekends and holidays)
2. We only accept PAYPAL payments and ship them to the address provided by PAYPAL.
3. All items will be inspected before shipment. Please be assured that quality is guaranteed.
4. No local transfer service is available.
Returns
1. This product comes with 30-Days Money Back Guarantee.
2. If you receive an item and it doesn't work properly or you don't like it because of any reason at all, we have a 100% refund/return policy. We will ship you a new item or refund your money for the full sale amount.
3. For all returned products, buyers MUST contact us for the returning address and a RMA number which should be written on the returned package and can be recognised by the warehouse.
Contact Us
1. We have always been trying to provide the best service and reliable products for every customer. please contact us to resolve any issue before going to a negative feedback.
2. For other information, please contact us and we will get back to you
ASAP
. If there is no reply within 24 hours, please check the spam in the mailbox.
Comfort Home
Hot Item
2x U`King 70W LED Stage Light RGBW 8 Pattern Gobo Moving Head DMX Disco Party DJ
USD 178.99
Sit Up Bar Assistant Gym Exercise Workout Equipment Fitness for Home Abdominal
USD 19.99
Digital Auto Range Clamp Meter Multimeter AC / DC Voltmeter Amp Volt Ohm Tester
USD 22.07
RGB Strobe Lamp DJ Rotating Ball Led Stage Laser Lights KTV Disco Club Party
USD 13.79
RGB LED Par Stage Lighting DMX Disco Club Party Wedding Uplighting Effect Light
USD 110.49
New List Item
16 Pattern Disco Laser Light RGB Projector LED DJ Stage Light Party KTV Lighting
USD 31.99
Wooden Easel Sketch Box Portable Folding Durable Artist Painters W/Caster Wheels
USD 107.99
60 Patterns Projector RGB LED Laser Stage Light Disco Magic Ball Party Lighting
USD 29.99
64LEDs RGBW LED Light Airship Moonflower DJ Club Lamp Stage Effect Lighting
USD 26.99
4X RGB 36LED Par CAN Light Effect 7CH DMX DJ Disco Party Stage Lighting Colorful
USD 57.99
Store Category
Store Home
Stage Lights
◈  Moving head light
◈  Par light
◈  Light bar
◈  Spotlight
◈  Laser Effect light
◈  Disco Ball
DMX Console
Atmospheric Effects Machines
Sporting Goods
Home & Garden
◈  Appliances
◈  Furniture
◈  Smart Home
◈  Children & Baby
Car Accessories & Tools
Electronics
Flashlight
Business & Industrial
Pet Supplies
Pro Audio Equipment
Other
Digital Auto Range Clamp Meter Multimeter AC / DC Voltmeter Amp Volt Ohm Tester
Specifications:
Color: blue, red
Type: digital clamp table
Battery: AAA (excluding battery)
Material: ABS
Display: LCD, updated 2000 times every 2 seconds
Polarity indication: "-" automatic display
Overrange indication: display "OL"
Indication of low battery: display "electrode"
Range selection: automatic
Measuring voltage range :600 (V)
Measuring current range :2-400 (A)
Measuring the resistance range: 200-200 k - 2 m (Ω)
Operating temperature: 0℃ to 40℃, less than 80% RH
Storage temperature: -10℃ to 50℃, relative humidity less than 85%
Battery type: 1.5v * 2, AAA size (excluding battery)
Technical conditions: 1 year accuracy guaranteed, 23℃±5℃ relative humidity less than 80% RH
Replace the battery: if the battery "+-" sign appears on the display screen, the battery should be replaced.Remove the screw and open the back cover and replace the used battery with a new one (AAA, 1.5v * 2 or equivalent).
Automatic shutdown:
A. If you do not operate the meter for about 15 minutes, it will turn off automatically.To turn it on again, simply rotate the range switch or press the button.
B. If the "hold" button is pressed to wake up the meter after the meter is automatically turned off, the automatic shutdown function will be disabled.
Introduction:
The instrument performs AC/DC voltage, AC current, resistance, audible continuity, diode and temperature measurements.It is a 3 1/2 bit, 2000 bit automatic range digital clamp multimeter.It has the function of polarity indication, data retention, maximum value retention, overrange indication and automatic shutdown.It is easy to operate and an ideal instrument.
Warning:
To avoid electric shock or personal injury, and to avoid damage to the instrument or equipment under test, please follow the following rules:
1. Check the case before using the meter.If the meter is damaged or the enclosure (or part of the enclosure) is removed, please do not use.Look for cracks or lack of plastic.Note the insulation around the connector.
2. Check whether the insulating layer of the meter pen is damaged or the metal is exposed.Check the conductivity of the test line.
3. The voltage between terminals or between any terminal and ground shall not exceed the rated voltage indicated on the instrument.
4. The rotating switch should be placed in the correct position and no range conversion should be carried out during the measurement to prevent damage to the meter.
5. When the effective voltage of the instrument in ac exceeds 60V or 30V RMS, extra care should be taken to avoid electric shock.
6. Use appropriate terminals, functions and ranges for measurement.
7. Do not use or store instruments in high temperature, high humidity, explosive, flammable and strong magnetic fields.The performance of the instrument may be degraded by dampness.
8. Put your finger behind the finger guard when using the stylus.
9. Before testing the resistance, conductivity or diode, disconnect the circuit power and discharge all high voltage capacitors.
10. Replace the battery immediately after the battery indicator light appears.If the battery is low, the meter may produce the wrong reading, which can lead to electrocution and personal injury.
11. Disconnect the connection between the meter pen and the circuit under test, and turn off the power of the meter before opening the case.
12. Please use only the same model or the same electrical specifications to replace the instrument.
13. The internal circuit of the meter shall not be altered at will to avoid damage to the meter and any accident.
14. The instrument surface should be cleaned with a soft cloth and mild detergent to prevent corrosion, damage and accidents.
15. The instrument is suitable for indoor use.
16. Turn off the power when the meter is not in use. Take out the battery when it is not in use for a long time.Continue to check the battery, because there may be leakage after a period of use, please replace the battery immediately when leakage occurs.Battery leakage can damage the meter.
Packing list:
1 x Multimeter
2 x Table pen
1 x Storage bag
1 x Instruction manual
Item Specifics
Display :
Digital
MPN :
Does Not Apply
Brand :
Unbranded
Features :
Auto Power Off
Form Factor :
Handheld
Resistance Range :
200-200 k - 2 m (Ω)
Measuring voltage range :
600 (V)
Measuring current range :
2-400 (A)
Test/Measurement Functions :
AC Current
Battery type :
1.5v * 2, AAA size (excluding battery)
Manufacturer Warranty :
1 year
Test/Measurement Functions :
AC Current
Battery type :
1.5v * 2, AAA size (excluding battery)
Payment
Shipping
Returns
Contact Us
1. We only accept payment via
PayPal
. Please kindly check if you can do the payment via PayPal before placing an order. If you don't have PayPal account, please register at paypal.
2. Payment must be received within 7 days after auctions ended. Unpaid dispute will be filed to eBay for the non payable bidders.
1. Items will be shipped within 2 business day of receipt of the verification payment.(except weekends and holidays)
2. We only accept PAYPAL payments and ship them to the address provided by PAYPAL.
3. All items will be inspected before shipment. Please be assured that quality is guaranteed.
4. No local transfer service is available.
1. This product comes with 30-Days Money Back Guarantee.
2. If you receive an item and it doesn't work properly or you don't like it because of any reason at all, we have a 100% refund/return policy. We will ship you a new item or refund your money for the full sale amount.
3. For all returned products, buyers MUST contact us for the returning address and a RMA number which should be written on the returned package and can be recognised by the warehouse.
1. We have always been trying to provide the best service and reliable products for every customer. please contact us to resolve any issue before going to a negative feedback.
2. For other information, please contact us and we will get back to you
ASAP
. If there is no reply within 24 hours, please check the spam in the mailbox.
All rights reserved.
On Jun-22-21 at 02:00:54 PDT, seller added the following information: