-40%

CRL Brushed Nickel Vienna Frameless Shower Pull and Hinge Set 3/8" - 1/2" Glass

$ 66

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • MPN: V1ES3BN
  • All returns accepted: Returns Accepted
  • Brand: CRL
  • Condition: New
  • Restocking Fee: No

    Description

    Catalog Number:
    V1ES3BN
    Finish:
    BRUSHED NICKEL
    Hinges for 3/8" to 1/2" (10 to 12 mm) Glass
    Set Includes Two Hinges and One Set of Pull Handles
    This
    CRL Shower Pull and Hinge Set
    consists of one set of BM6X6 Tubular Back-to-Back Pull Handles with metal washers, and two each Vienna 037 Series Wall Mount Hinges.
    CRL Vienna Hinges
    are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Vienna Hinge to be used with it's own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it's own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular shaped, square cornered cut-outs.
    STANDARD REVERSIBLE PIVOT PIN:
    Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90º. The opposite side of the Pin is marked 85º. Standard Vienna Hinges come with the 90º side activated. Pre-Set Models come with the Pin pre-set for 85º (5º tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.
    CUSTOM PIVOT PIN:
    Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90º. If the standard 5º Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45º).
    Using two hinges
    with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm).
    Using three hinges
    with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum door width of 36" (914 mm).
    SPECIFICATIONS:
    Glass Thickness:
    3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass
    Construction:
    Solid Brass
    Hinge Swings:
    90º In and 90º Out
    Closing Type:
    Self-Centering when within 15º of closed position.
    Cut-Out Required - Except V1E092 which Requires Cut-Out for Door and Two Holes for Fixed Panel
    Includes:
    Gaskets, Screws, and Glass Fabrication Dimensions