Clamp Meter Amp meter Digital Multimeter 6000 Counts with NCV Auto-Ranging Testi

Description

Product Description
Tacklife CM06 Clamp Meter 6000 Counts Auto-Ranging
The tool CM06 of TACKLIFE is a clamp meter with an automatic measuring range of 6000. It is easy to use and innovative. The clamp meter with convenient use can safely measure AC/DC current, AC/DC voltage, resistor, diode, on-off and capacitor without stripping or disconnecting the circuit to avoid dangerous situations.
The clamp meter also has "SEL" function selection keys, "Hz/%" frequency/duty ratio selection keys, "ZERO" automatic zero-setting keys, "HOLD" data retention keys, and backlight/working light keys.
Specification:
Environmental conditions: 600V CAT. III, pollution degree: II, altitude <2000m
Working environment humidity: 0~40°C (<80% RH, not considered when <10°C).
Storage environment temperature and humidity: -10 ~ 60 ° C (<70% RH, remove the battery).
Temperature coefficient: 0.1X accuracy / °C (<18 ° C or > 28 ° C).
Maximum allowable voltage: 600V DC or 600V AC rms.
Sampling rate: about 3 times / sec.
Display: 33/4-digit LCD display.
Overrange indication: The LCD will show “OL”.
Input polarity indication: “-” is automatically displayed.
Dimensions: 218mm X 78mm X 32mm
Weight: no more than 280g (with battery)
Clamp head opening maximum size: 26mm
Safety Compliance
The Digital Clamp Meter meets the safety standards of double insulation, overvoltage CAT III 600V and pollution level 2. Safer operation and safer use.
AC or DC Current measure
AC or DC Voltage measure
Resistance, Diode, On-off, Capacitance measure
NCV Voltage Induction and Test Wire
Low Battery Indicator
Automatic Power Off
LOWz measure
Automatic Power Off
When you do not have any operation after 15 minutes, the meter will automatically enter sleep mode. You can turn the meter on again by pressing any button.
Low Battery Indicator
When the battery is low, the meter will automatically remind you that you need to replace the battery in time to prevent the meter from suddenly losing power.
Tacklife - Amazon's first professional team dedicated to tool development. We are committed to providing quality tools to solve your life problems.
Resistance, Diode, On-off, Capacitance measure
When you measure resistance, diodes, switches, and capacitance, be sure to turn off the power to the circuit under test and discharge all capacitors.
AC or DC Voltage&Current Measure
Rotate the measuring function selection turntable to the voltage test gear, and select the AC or DC voltage measurement function by pressing the "SEL" key. The black pen line and the red pen line are connected to the COM input jack and the INPUT input jack respectively. The voltage of the circuit to be tested is measured at the other two ends of the pen. The operation is simple.
NCV Voltage Induction and Test Wire
When the voltage induction area of NCV is close to 90-1000V AC voltage or fire line, the instrument will emit sound of sound and light alarm signal "droplet". Make the measurement safer.