BSIDE ESR02 PRO Digital Transistor SMD Components Diode tester with test leads

Description

BSIDE ESR02 PRO Digital Transistor SMD Components Diode tester with test leads
Description
1. Product Description
This Tester is a small tool design for Engineer, Electronic Maintenance and Factory.
It’s very easy to test plug-in and SMD devices, also can test different kinds of Diodes, Triodes, Thyristors, MOSFET; able to analysis the device type, the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.
2. Attention
● Always be sure to discharge capacitors before connecting them to the Tester!
● If using DC supply, please choose DC 9V-12V adapter(including 9V and 12V).
● When the battery power is under 6V, please replace a new one.
3. Measuring Parameters
Resistor: 0Ω-50MΩ Resolution: 0.01Ω
Capacitor: 25pF-100mF Resolution: 1pF
Inductor: 0.01mH-20H Resolution: 0.01mH
Capacitor ESR: 2μF-50mF Resolution: 0.01Ω
(ESR: Equivalent Series Resistance)
Calibration
● Short T1,T2,T3 to one, then press button.
● When LCD shows “Selftest mode.. ?”, press button within 2 seconds to enter calibration mode, otherwise will come into transistor test mode.
● Tester automatic calibrating until LCD shows “isolate Probes!”, then separate T1,T2 and T3.
● Wait a few seconds until LCD shows “Test End”.
Package list:
ESR02 Pro multimeter
one pair of Agllicator clip test leads ( 1 red + 1 black 80cm );
Manual
eBay Cross Border Trade powered by ChannelEffect