Audio-Technica AT-LPW50PB Fully Manual 2-Speed Belt-Drive Turntable

Description

Electronic Express eBay Listing Description
Audio-Technica AT-LPW50PB Fully Manual Belt-Drive Turntable
The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.
Key Features:
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Motor features a speed-sensor system to maintain accurate platter rotation speed
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 universal 1/2"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest
Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish
High-isolation, height-adjustable feet
Built-in switchable phono preamplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
What's in the box:
Dust cover
Platter
Turntable mat
Drive belt
Counterweight
AT-HS4 headshell
AT-VM95E stereo cartridge (black)
45-RPM adapter
RCA audio cable (approx. 1.0 m (3.3'))
AC adapter (approx. 1.5 m (4.9'))
Dust cover hinges
Specifications:
Type:
Belt-drive manual turntable
Motor:
DC servo with Active Speed Stabilization
Drive Method:
Belt drive
Speeds:
33-1/3 RPM, 45 RPM
Turntable Platter:
Die-cast aluminum
Wow and Flutter:
< 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio:
>60dB
Output Level:
Pre-amp “PHONO”:
4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”:
200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain:
35 dB nominal, RIAA equalized
Power Supply Requirements:
100-240 V, 50/60 Hz, 0.5 A Max.
Tonearm Type:
Static balanced straight carbon tonearm
Effective Arm Length:
223.6 mm
Overhang:
18.6 mm
Tracking Error Angle:
<2 degrees
Applicable Cartridge Weight:
12-17 g
Stylus Pressure Adjustment Range:
0-3 g
Replacement Stylus:
AT-VMN95E BK
Dimensions (WxDxH):
With Dustcover:
16.54" x 14.02" x 4.96"
Without Dustcover and Hinges:
16.54" x 14.02" x 4.49"
Weight (Without Dustcover):
12.26 lbs.
Stunning Look, Stunning Sound
Marked by the high-gloss, piano-black finish of its anti-resonance plinth, the AT-LPW50PB offers sleek, modern styling to match the supreme accuracy of its sensor-monitored motor.
Designed for a Higher Level of Listening
The AT-LPW50PB is equipped with a straight, matte-finish, carbon-fiber tonearm and comes with an AT-HS4 universal 1/2"-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.
Over 55 Years of Analog Excellence
We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.