Audio-Technica AT-LP7 Fully Manual Belt-Drive Turntable Black

Description

Audio-Technica knows how critical a cartridge plays in reproducing high-fidelity audio from vinyl. The AT-LP7 is a fully manual, belt-drive turntable designed around the VM cartridge line, incorporating the finest materials and structures in support of the cartridge’s performance. The AT-LP7 comes with a VM520EB Dual Moving Magnet Cartridge with a 10 g AT-HS10 headshell and 0.3 x 0.7 mil elliptical bonded stylus. That stylus can be replaced with any of the six VM styli, so users can upgrade the stylus without buying a new cartridge.
The headshell attaches to a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors
Audio-Technica AT-LP7 Fully Manual Belt-Drive Turntable Black
Audio-Technica knows how critical a cartridge plays in reproducing high-fidelity audio from vinyl. The AT-LP7 is a fully manual, belt-drive turntable designed around the VM cartridge line, incorporating the finest materials and structures in support of the cartridge’s performance. The AT-LP7 comes with a VM520EB Dual Moving Magnet Cartridge with a 10 g AT-HS10 headshell and 0.3 x 0.7 mil elliptical bonded stylus. That stylus can be replaced with any of the six VM styli, so users can upgrade the stylus without buying a new cartridge.
The headshell attaches to a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. It includes an adjustable counterweight and anti-skate control. The height of the tone arm can be adjusted from 0 mm to 6 mm to accommodate a wide variety of cartridges.
The turntable chassis is constructed of 40 mm-thick MDF. MDF is an excellent anti-vibration damping material that limits low-frequency acoustical feedback. The anti-resonance platter is made of 20 mm-thick polyoxymethylene. It is driven by a sensor-monitored motor that ensures a continuously accurate platter rotation speed of 33-1/3 or 45 RPM. The AT-LP7 also includes a built-in switchable phono/line preamp for connection to components with or without a dedicated phono input. It also features a selector switch to designate operation with a moving magnet or moving coil cartridge.
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Motor features a speed-sensor system to maintain accurate platter rotation speed
VM520EB Dual Moving Magnet Cartridge provides outstanding channel separation and extended frequency response, and allows for easy replacement with any VM stylus
J-shaped tone arm features a metallic gimbal suspension system and precision bearings for excellent tracking
Built-in switchable phono pre-amplifier with selectable modes for moving magnet or moving coil cartridges
20 mm-thick, anti-resonance, polyoxymethylene platter
40 mm-thick MDF (medium density fiberboard) chassis
Lightweight AT-HS10 headshell
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, and dust cover
Orders are generally shipped the following business day after payment is received. For example, if your order is placed and paid for at 1 p.m. Eastern Time on Friday, Woodwind & Brasswind will ship it on Monday. We are only shipping eBay orders via standard ground shipping at this time (3-7 business days for delivery once the item leaves our warehouse)
We use eBay Managed Payments and accept the following forms of payment credit, debit, and gift cards, Apple Pay, Google Pay, PayPal, and PayPal Credit.
We are required to collect sales tax on all orders shipped to Alabama, Arkansas, Arizona, California, Colorado, Connecticut, District of Columbia, Georgia, Hawaii, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin and Wyoming. You will be charged the state and local sales tax rate for any orders shipped to these states. Georgia, Louisiana, Rhode Island and Pennsylvania Residents: Woodwind & Brasswind is not obligated to, and does not, collect sales tax in your state. Your purchase is subject to sales/use tax in these states unless it is specifically exempt from taxation. The purchase is not exempt merely because it is made over the Internet or by other remote means. These states require that you file a sales/use tax return at the end of the year reporting all of the purchases that were not taxed on those purchases. Retailers that do not collect sales tax in these states are obligated to provide purchasers an end-of-year summary of purchases in order to assist them in filing their tax report. Retailers that do not collect sales tax in these states may be required by law to provide the Department of Revenue with an annual report of the total amount of all of your purchases above certain thresholds. Details on how to file this return may be found at your applicable Department of Revenue website.Alabama residents: Seller has collected the simplified sellers use tax on this transaction(s) delivered into Alabama and the tax will be remitted on the customer’s behalf to the Alabama Department of Revenue. Seller’s program account number is SSU-R010211465
Our products are backed by our 45-Day Satisfaction Guarantee. Our commitment to you is to ensure that you are completely satisfied with your purchase.
New Gear: If you’re not satisfied, neither are we. If for any reason you’re not completely satisfied with your purchase of a new item, simply return it in its original condition within 45 days of purchase (see exceptions below) and we’ll give you a full refund. It’s that simple.
Returned items must be in original, brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings or scrapes on the instrument or collateral materials. Items must also include all original packaging, manuals, warrantees and accessories or your return may be subject to a return handling charge.
Your refund will be promptly processed upon successful evaluation of your returned item from our trained category professionals. Refunds are made for product value only, excluding shipping and handling charges. If you received Free Shipping on your order, the value of the uncharged shipping cost will be deducted from your refund.
Limitations and Exceptions
Returns of the following products must be made within 10 days of shipment - Stringed instruments priced at 99.00 or more. The following products cannot be returned – Clearance items, Apple products, items identified as non-returnable, discontinued items, electronic software downloads, demo gear, vintage instruments, strings, reeds, computers, tubes, earbuds, earplugs, recorders, tin whistles, flutophones, "world" wind instruments, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluid, clothing/footwear, body jewelry, sheet music, cleaners, polishes and polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.The following fees apply to Band & Orchestra returns - All returned woodwind and brass instruments incur a .00 sanitization fee. Returned bows are assessed a .00 restocking fee. Returned mouthpieces over 0 incur an .00 sanitization fee; the fee for mouthpieces under 0 is .00.