150W Co2 Laser Tube Engraver Cutter Machine Power Supply forced air cooling NEW

Description

Features: *Good compatibility: It can adapt to CO2 laser tubes below 170W from many manufacturers. * Laser equipment is more secure: with open circuit protection, significantly extending power life. * Laser power control is simple: you can use high-level or low-level signal control, or you can use digital signal control. * Cutting type and engraving type optional: good cutting stability, strong adaptability; fast engraving speed and good engraving effect. * The power supply itself has a manual light test function, which is more convenient for maintenance. FG: ground wire AC: 110V Test: manual test light button TH: high level light TI: Low level light WP: Water protection G: ground wire IN: Control input signal 5V: 5V voltage The meaning of the terminals is as follows: TH input signal: W
Store category
Sign Up Now !
You may also like
150W Co2 Laser Tube Engraver Cutter Machine Power Supply forced air cooling NEW
Product Description
Features:
*Good compatibility: It can adapt to CO2 laser tubes below 170W from many manufacturers.
* Laser equipment is more secure: with open circuit protection, significantly extending power life.
* Laser power control is simple: you can use high-level or low-level signal control, or you can use digital signal control.
* Cutting type and engraving type optional: good cutting stability, strong adaptability; fast engraving speed and good engraving effect.
* The power supply itself has a manual light test function, which is more convenient for maintenance.
FG: ground wire
AC: 110V
Test: manual test light button
TH: high level light
TI: Low level light
WP: Water protection
G: ground wire
IN: Control input signal
5V: 5V voltage
The meaning of the terminals is as follows:
TH input signal:
When the switch light controls the high level (
≥
3V), the light is emitted, and when the low level (
≤
0. 3V), the light is not emitted.
TL input signal:
Switching light control, no light when high level (>3V), light output when low level (
≤
0. 3V)
WP*1 input signal:
Switching light control, no light when high level (
≥
3V), light output when low level (
≤
0. 3V)
G signal ground:
This foot must be well connected to the casing of the laser machine and the ground of the control board.
IN*2 input signal:
The laser power control terminal can be controlled by 0- -5V analog signal, or can be controlled by 5V amplitude PVM signal.
5V output power:
5V output with a maximum output current of 20mA
Product parameters:
Input voltage: 110V
AC frequency: 47-440HZ
M
ximum input power: 1000W
Maximum input current: 10A
Maximum output voltage: DC 50KV
Maximum output current: DC 38mA
Efficiency:
≥
90% (when fully loaded)
Response speed:
≤
1ms (from the time the switching signal is given until the output current rises to 90% of the set current)
Withstand voltage: input-output, input-case: AC1500V 10mA 60s
Operating environment: working temperature (-10-40
°
C), relative humidity:
≤
90%
Cooling form: forced air cooling.
The package contains:
1*HY-T150 power supply
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On Feb-09-21 at 00:00:51 PST, seller added the following information: